Accessories
Intruder Sensor
•
The intruder sensor is located in the center part of the roof on sliding sunroof-equipped
vehicles or in the forward part of the roof on sliding sunroof non-equipped vehicles.
•
The intruder sensor detects movement in the vehicle by radio waves and sends the
detection signal to the BCM.
•
An intruder sensor cut-off switch has been installed on the keyless entry system
transmitter as well as on the advanced keyless transmitter. If the intruder sensor cut-off
switch is pressed while the theft-deterrent system is pre-armed, the intruder sensor is
switched off.
Intruder sensor (without sliding sunroof)
1
2
Intruder sensor (with sliding sunroof)
3
Rear intruder sensor (WGN)
4
Transmitter
09-56
Body & Accessories
5
Intruder sensor cut-off switch
6
4SD, 5HB
7
WGN
Service Training Mazda6 Facelift
M6FL_09032