The Configuration-Type Root Commands - Xconfiguration - TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual

2.3 The Configuration-type root commands -
xconfiguration
The information accessible through these commands is exactly the same information that is available
in the corresponding XML documents.
To get an overview of accessible top-level configuration elements, type ? or help after the
configuration-type root command:
<configuration-type root command> ?
Example 2.6
?
- User Configurations -
Authentication LDAP
Ethernet Links
ExternalManager Log
Gatekeeper NTP
HTTP Option [1..64]
HTTPS Pipes
IP Services
IPProtocol Session
OK
2.3.1 Configuration help
To get help on configurations, type the configuration-type root command, followed by an address
expression, followed by ? or help. The possible values for the elements matching the address
expression will be returned.
<configuration-type root command> <address expr> ?/help
Example 2.7
User wants to configure IP:
ip ?
*h IPProtocol: <Both/IPv4/IPv6>
*h IP Address: <IPAddr>
*h IP SubnetMask: <IPAddr>
*h IP Gateway: <IPAddr>
*h IP V6 Address: <S: 0, 39>
*h IP V6 Gateway: <S: 0, 39>
*h IP DNS Server [1..5] Address: <S: 0, 39>
*h IP DNS Domain Name: <S: 0, 128>
D14172.01
TANDBERG Gatekeeper/Border Controller API User Guide
SNMP
SSH
SubZones
SystemUnit
Telnet
TimeZone
Traversal
Zones
page 26 of 84