The Status-Type Root Commands - Xstatus / Xhistory - TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual

2.2 The Status-type root commands –
xstatus / xhistory
The information accessible through these commands is the exact same information that is available in
the corresponding XML documents.
To get an overview of accessible top-level elements within a status-type root command, type ? or
help after the status-type root command.
Example 2.3
xstatus ?
- Status -
Calls NTP
Ethernet Options
ExternalManager Pipes
Feedback [1..3] Registrations
Gatekeeper ResourceUsage
IP SubZones
LDAP SystemUnit
Links Zones
OK
xhistory ?
- History -
Calls Registrations
OK
To access status-type data, simply type the status-type root command (xstatus or xhistory) and
then an XPath address expression or a TANDBERG SimplePath expression:
<status-type root command> <address expression>
Example 2.4
xstatus registrations registration 1 aliases alias 1
*s Registrations:
Registration 1:
Aliases:
Alias 1 (type=H323Id, origin=Endpoint): "alice@example.com"
*s/end
OK
D14172.01
TANDBERG Gatekeeper/Border Controller API User Guide
page 24 of 84