Cleaning, Maintenance, And Lubrication - Chicago Electric 62422 Owner's Manual & Safety Instructions

Maintenance and Servicing
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Unlock and release Trigger and
unplug tool from its electrical outlet
before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE: Do not use
damaged equipment. If abnormal noise
or vibration occurs, have the problem
corrected before further use.
Page 12
For technical questions, please call 1-888-866-5797.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for loose
hardware, misalignment or binding of
moving parts, cracked or broken parts,
damaged electrical wiring, and any other
condition that may affect its safe operation.
2. Inspect the Saw Blade. Replace with
a new Saw Blade when needed.
3. AFTER USE, wipe external surfaces
of the tool with clean cloth.
4. WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.
Item 62422