Table of Contents
Advertisement
Note
If you enter the following address in a web browser,
maintenance mode enable/disable menu items are
added to the Tools menu.
https://(IP address of unit)/ns-panel/
?maintenance=show
• Enable maintenance mode: Enables maintenance mode
for accessing the status of the unit.
• Disable maintenance mode: Switches the unit from
maintenance mode back to normal operation mode.
Help: Contains the following items.
• Update System: Uploads an updater and updates the
system.
• User Manual: Displays the Operating Instructions (PDF).
• About Remote Control Panel Web Menu: Displays
information relating to the web menu.
Note
When communication between the browser and remote
control panel is disconnected, an error dialog appears.
Also, communication between the browser and remote
control panel is disconnected when
top right of the web menu screen. Reconnect from the
browser.
Panel Table Page
(Not supported on the MKS-E1620.)
Use to assign functions to function buttons and assign
connectors to selection buttons.
Setting the layout
1
Select the [Layout] radio button.
2
Double-click the button you want to change in the
panel diagram. Alternatively, double-click a row in
the list, or select the row and click the [Edit] button.
A selection button changes to a function button, and
a function button changes to a selection button.
3
Click the [Save] button.
Setting function buttons
1
Select the [Function Button] radio button.
2
Double-click the function button you want to set in
the panel diagram. Alternatively, double-click a row
in the list, or select the row and click the [Edit]
button.
3
Select the function to assign to the button in the
dialog.
No Assign: Select to assign no function to the function
button.
Monitor: Set the Monitor function.
Status: Set the Status function.
Protect: Set the Protect function.
Lock(Chop): Set the Lock(Chop) function.
Assign: Set the Assign function.
Source, Destination/Level: Set the Source,
Destination/Level function.
Entry: Set the Entry function.
4
5
6
Setting selection buttons
1
2
is displayed at the
3
4
5
6
7
Source Reentry Lists Page
(Not supported on the MKS-E1620.)
Use to associate the monitor target destination of the
destination monitor function with a source in the reentry
table. Configuring a reentry table allows you to execute the
destination monitor function when a source selection
button is pressed. You can specify up to 128 reentry tables.
15
Page Up/Group Up: Set the Page Up/Group Up
function.
Page Down/Group Down: Set the Page Down/Group
Down function.
Group Up: Set the Group Up function.
Group Down: Set the Group Down function.
Shift: Set the Shift function.
Home: Set the Home function.
Back: Set the Back function.
For details about each function, see
buttons" (page 7)
in "NS-BUS Operation" in the
"Operation" section.
Click the [Apply] button.
Repeat steps 2 to 4 until finished the configuration.
Click the [Save] button.
Select the [Select Button] radio button.
Select the page number you want to set, and
specify a page name as required.
Double-click the selection button you want to set in
the panel diagram. Alternatively, double-click a row
in the list, or select the row and click the [Edit]
button.
Set the function to assign to the button in the
dialog.
No Assign: Select to assign no function to the button.
Source/Destination: Set the source number or
destination number to assign. You can also set
both. When [Color Settings] is set to [Button] on the
[Display Settings] page, you can set separate colors
for sources and destinations.
Monitor: Set the destination monitor function for the
selection button. Specify the destination number
to monitor in the dialog. Setting the destination
monitor function monitors the selection
information for that destination and automatically
selects the same source as that destination.
Level: Assign a level to a selection button to use as a
LEVEL selection button. Enter a level name, and
place a check mark beside the level to assign to the
selection button.
Click the [Apply] button.
Repeat steps 3 to 5 until finished the configuration.
Click the [Save] button.
"Function
Advertisement
Table of Contents
