Programming - Siemens Albatros2 RVA78.690 User Manual

14 / 64
Siemens
Building Technologies
5.4

Programming

5.4.1 Setting principle
Settings that cannot be made directly with the help of operating elements are made
through programming. For this purpose, the individual settings are structured in the
form of menus and operating lines, thus creating practical groups of settings.
The following example shows how to set the time of day and the date.
5.4.2 Example: "Setting the time of day"
• Press OK to go to programming.
• Press the ESC button to go one step back at a time, readjusted values are not
adopted
• If no setting is made for 8 minutes, the display returns automatically to the basic
display
• Operating lines may be hidden, depending on configuration and user level
Operation Display example
1
R1 R2
2
R1 R2
3
R1 R2
4
R1 R2
Solar compact controller
Handling
Description
Basic display.
If the basic display is not shown,
press the ESC button to go back.
Press OK.
The bottom section of the display
shows various menus.
Turn the setting knob until menu
Time of day and date appears.
Press the OK button to confirm.
In the bottom section of the
display, the first operating line of
menu Time of day and date
appears.
Turn the setting knob to Time of
day.
Press the OK button to confirm.
The clock flashes on the display.
Turn the setting knob to the correct
time.
Press the OK button to confirm.
CE1U2396en
18.08.2010