To Change The Front Cover Unit - Janome FOUR-DBL Service Manual

TO CHANGE THE FRONT COVER UNIT

To remove:
1. Remove setscrews A and the looper cover unit.
2. Remove the face plate unit, the back cover unit and top cover.
3. Turn the hand wheel toward you with your hand, and set the upper looper at its lowest position, and
remove setscrews B, C, D, E and the front cover unit.
To attach:
4. Attach the front cover unit with setscrews B, C, D and E.
5. Attach the looper cover unit with setscrew A.
6. Attach the top cover, the back cover unit and face plate unit.
Front cover unit
Upper looper should be set
at its lowest position
Setscrew C
Setscrew D
Setscrew A
Looper cover unit
4
Setscrew B
Setscrew E