To Change The Front Cover Unit - Janome 990D Service Manual

990D
To remove:
1. Remove the face cover and belt cover unit.
2. Turn the handwheel toward you with your hand, and set the upper looper at its lowest position,
and remove the setscrews A, B, C, D, E and the front cover unit.
To attach:
3. Attach the front cover unit with setscrews A, B, C, D and E.
4. Attach the belt cover unit and face plate unit.
Upper looper should be set
at its lowest position
Setscrew B

TO CHANGE THE FRONT COVER UNIT

Setscrews A
Setscrew C
4
Setscrew E
Setscrew D
Front cover unit
Looper cover unit