To Adjust The Position Of The Lower Looper Thread Guide - Janome FOUR-DBL Service Manual

TO ADJUST THE POSITION OF THE LOWER
LOOPER THREAD GUIDE
Lower Looper Thread Guide (4)
Loosen setscrew A, and adjust the lower looper thread guide (4) so that the hold of thread guide is in
line with the groove of lower looper as shown in Fig. 1.
NOTE: After adjustment, check that lower looper thread guide (4) should not touch the arm and
feed dog.
Looper Thread take-up lever
Loosen setscrew C, and the bottom side of the looper thread take-up lever is in line with the bottom
side of the upper looper waving arm.
Tighten setscrew C to secure the position.
View from B
Lower looper
thread guide (4)
B
Setscrew A
Lower looper
thread guide (3)
(Fig. 1)
The hole is line with the groove of lower looper.
Lower looper thread guide (4)
Lower looper
Agreement
Looper thread take - up lever
25
Upper looper waving arm
Setscrew C
(Fig. 2)