Call Feature Codes - D-Link DPN-1021G User Manual

DPN-1021G GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual

Call Feature Codes

On the VoIP / Call Feature Codes page, you can allow changing some parameters of the
gateway directly from the phone set connected to the FXS port of the gateway.
The following call feature codes are available:
Parameter
Disable Call Waiting
Enable Call Waiting
Disable Do Not Disturb
Enable Do Not Disturb
Enable Call Forwarding No
Answer
Disable Call Forwarding No
Answer
Enable Call Forwarding On Busy
Disable Call Forwarding On Busy Disables call forwarding when this line is busy.
Enable Unconditional forwarding Enables forwarding for all calls.
Disable Unconditional forwarding Disables forwarding for all calls.
Figure 80. The VoIP / Call Feature Codes page.
Disables the call waiting function.
Enables the call waiting function.
Disables rejection of incoming calls.
Enables rejection of all incoming calls (the busy tone
will be heard).
Enables call forwarding when this line gives no reply.
Disables call forwarding when this line gives no reply.
Enables call forwarding when this line is busy.
Page 110 of 145
Configuring via Web-based Interface
Description