Table of Contents
Advertisement
DPN-1021G GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Routing call
On the VoIP / Routing call page, you can fill in the phone book for a device connected to the FXS
port of the gateway.
In the Speed Dial section, you can assign phone numbers to the digital keys of the phone set
connected to this line. To do this, left-click the line corresponding to the key of the phone set. In the
opened window, enter the needed number in the Number field and click the SAVE button. Also
you can specify a number in the format phone_number@IP_address for direct IP calls by
passing the SIP proxy server.
To change or delete the number assigned to the digital key, left-click the line corresponding to the
key of the phone set, in the opened window, edit or remove the value of the Number field and click
the SAVE button.
To use a number specified in the Speed Dial section, press # (the pound key) on the phone set,
then press the relevant digital key.
In the Abbreviated Dial section, you can assign short numbers (as a rule, such numbers consist of
two or three digits) to frequently used phone numbers. To do this, click the Add button. In the
opened window, enter a short number in the Source number field, then enter the actual phone
number in the Destination number field. Click the SAVE button. Also in the Destination
number field you can specify a number in the format phone_number@IP_address for direct
IP calls by passing the SIP proxy server.
To change a short or actual phone number, select of the relevant line in the table. In the opened
window, change needed parameters and click the SAVE button.
To remove a phone number, select the checkbox located to the left of the relevant line in the table
and click the Delete button.
Figure 79. The VoIP / Routing call page.
Page 108 of 145
Configuring via Web-based Interface
Advertisement
Table of Contents
