Print Density Setting - Oki LD670 User Manual

6-7. Print Density Setting

The printer can specify a print density for the paper to be used.
The print density is preset to 130% at shipping. You can change this setting to
the value appropriate for the paper to be used as described in Section 3-5,
"Recommended Thermal Paper."
There are three methods of changing the setting:
(1) Using the Windows printer driver
See "Section 4.4 [Graphics] Tab" in the
(2) Using the printer utility
See "Section 3.2.5 Customize Value" in the
(3) Setting up the printer
Change the setting as described in Example (1) in Section 10-2, "Setting Up
the Printer."
* If you have specified a print density using the Windows driver, the print
density specified by the driver will be used for printing. (The print density
specified by the driver takes precedence over print density specified by
the utility.)
Windows Driver User's Guide
Utility User's Guide
67
.
.