Connecting The Drawer Kick Cable - Oki LD670 User Manual

4-2. Connecting the drawer kick cable

Open the connector cover at the rear of the printer by pulling it up, and connect
the drawer kick cable to its rear connector socket. Close the cover after
connecting the cable.
Note : If the cable is arranged so that it extends from the rear, remove the inserts
in the connector cover with nippers or a similar tool. Unless the inserts are
removed in this case, the cable may be damaged and cause a failure.
Note : The drawer kick cable must not be used for a purpose other than for control
of the drawer.
Connector cover
Insert
Drawer kick cable
26