Zinc Plated Swivel Anchors - Honeywell Miller RACDTA-5K6/6FT User Instruction Manual

7.0 Zinc Plated Swivel Anchors

10,000 lbf/44kN
Model Numbers RACSWY100N (Swivel only), RACSWY100S (Swivel anchor with steel mount-
ing hardware), and RACSWY100C (Swivel anchor with concrete mounting hardware), RAC-
SWY1SBA (Steel mounting hardware only), RACSWY1CSA (Concrete mounting hardware),
RACSWP100N-KIT (Weld kit) and RACSWX100N (Steel back plate).
Warnings and Limitations
• Use only with Honeywell-approved personal fall arrest or restraint systems. The anchorage
must have the strength capable of supporting a static load, applied in the directions
permitted by the system, of at least 10,000-lbf (22kN) in the absence of certification.
• The anchorage connector may be pulled in any direction shown in the LOADING
CONDITIONS DIAGRAM (Pg. 15)
8.0"ø
(203.2mm)
Tensile Strength (UTS): 10,000-lbf (44kN)
Working Load (WLL): 2,000 lbs (907kg)
Maximum Capacity: One worker, 310 lbs (140 kg)
Weight: 1.2 lbs (544.3g)
Regulatory Compliance
ANSI Z359.1-2007, ANSI Z359.7-2011, OSHA 1910.66, 1926.502
U s e r In s t ru c t ion s - En g li s h
180°
360°
5.5"
(139.7mm)
14
2.25"ø
(57.15mm)
3.0"
(76.2mm)
1.0"
(25.4mm)