Honeywell Miller RACDTA-5K6/6FT User Instruction Manual page 12

5/8"-11
Lock Nut
5/8" Lock
Washer
5/8"-11x4"
Hex Bolt *
* For steel applications a grade-5, 8 (or equivalent) bolt no shorter than 4" (100mm)
with a locking nut and washer must be used. Swivel anchor must be flush with steel
surface. A 16mm bolt may be used in place of a 5/8"-11 for metric applications.
316 Stainless Steel 5/8"-
11 x 1-3/4" Bolt
Torque:
85-ft lbs
(115Nm)
* Welding procedure must be approved by a Engineer or other
qualified person to be compatible with any and all structural &
operational characteristics of the selected installation location.
Us er Ins tru ct ion s - Engl is h
STEEL MOUNTING
Torque Range:
75 ft-lbs.
(100Nm)
drill 5/8" (16mm)Ø
1/4"
(6mm)
min.
WELD-ON MOUNTING
* Use tapered washer with I-
beams that have tapered flanges
12
Puck
* Weld