20180306130515_32MKJ8001_eng_BOOK Page 56 Tuesday, March 06 2018 13:14:26 JST
Indicators
If one of these indicators does not come on when it should, have your dealer check for
problems.
High beam indicator
Torque Control indicator
Comes on when the ignition switch is turned to
●
the (On) position. Goes off when your speed
reaches approximately 5 km/h (3 mph) to
indicate Torque Control is ready to work.
Blinks when Torque Control is operating.
●
If it comes on while riding:
Torque Control OFF indicator
Comes on when the Torque Control is turned off.
HISS indicator
(P.129)
Comes on briefly when the ignition switch is
●
turned to the (On) position. Goes off if the
ignition key has the correct coding.
Flashes every 2 seconds for 24 hours when
●
the ignition switch is turned to the
position.
(P.133)
(Off)
Continued
53