Honda CB1000RA KO Manual page 47

20180306130515_32MKJ8001_eng_BOOK Page 47 Tuesday, March 06 2018 13:14:26 JST
Instruments
(Continued)
1 Shift up rev setting
You can adjust the shift up point.
Turn the ignition switch to the (On)
a
position.
Select the LINE mode.
b
The tachometer bar and numerical of
u
tachometer on INFO 2 display start
flashing, and the message of "SHIFT REV"
scroll in INFO 1 display.
Tachometer
Numerical of tachometer
44
(P.35)
Each time the (up) button or the
c SEL
(down) button is pressed,
SEL
tachometer bar and numerical of
tachometer on INFO 2 display increase or
decrease by 200 r/min (rpm) (one segment).
When the set value exceeds the allowable
range, the set value automatically returns to
5,000 r/min (rpm) or 11,400 r/min (rpm).
Press and hold the
SEL
u
or the (down) button to
SEL
advance the RPM fast.
Available setting range: 5,000 to 11,400
u
r/min (rpm)
Press the button. The shift up rev is
d MODE
set, and then the display moves to the siht
width setting.
(up) button