20180306130515_32MKJ8001_eng_BOOK Page 130 Tuesday, March 06 2018 13:14:26 JST
#
Rebound Damping
You can adjust the rebound damping by the
TEN adjuster to suit the load or the road
surface.
Turn the adjuster using the Standard/Phillips
screwdriver provided in the tool kit.
The TEN adjuster has 3 turns.
Turn clockwise to increase rebound damping
(hard), or turn counterclockwise to decrease
rebound damping (soft).
The standard position is 1 3/4 turns from the
full hard position so that the punch mark on
the adjuster aligns with the reference punch
mark.
Other Adjustments
P. 98
2
NOTICE
Do not turn the adjuster beyond its limits.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
Adjusting the Rear Suspension
u
Reference
punch
mark
Punch mark
TEN adjuster
Standard/Phillips
screwdriver
127