Specifications; Parts List - Central Hydraulics 34271 Operating Instructions Manual

Weight Capacity
Maximum Height
Minimum Height
Before use, assemble the Floor Jack as follows:
1. Remove the Hex Head Screw (38) from the Lower Handle (36).
2. Insert the fitted end of the Upper Handle (37) into Lower Handle. Rotate Handles
until the bolt holes line up, and secure in place with the Hex Head Screw (38).
3. Remove Handle Bolt (34) from the Handle Socket (39).
4. Insert Handle Assembly into Handle Socket and turn Handle Assembly clockwise
until it engages the pressure release gear located underneath the Handle Socket.
5. Thread Handle Bolt into Handle Socket and tighten.
part Description
1 Side Plates
2 Caster Assembly
3 Locknut
4 Wheel
6 Retaining Ring
7 Power Unit Assembly
8 Socket Head Cap Screw
9 Split Lockwasher
10 Lift Arm Assembly
11 Arm Shaft
12 Saddle
13 Grease Fitting
14 Link Bolt
15 Retaining Ring
16 Link Block (Ram)
17 Cotter Pin
18 Return Spring
19 Retaining Ring
20 Lockwasher
21 Hex Nut
SKU 34271

SpeciFicationS

3 Tons (6,000 lb.)
20-1/2"
5-3/4"
aSSembly

partS liSt

Q'ty part
1 22
2 23
2 24
2 25
2 26
1 27
2 28
2 29
1 30
1 31
1 32
1 33
1 34
1 35
1 36
1 37
2 38
2 39
2 40
2 41
For technical questions, please call 1-800-444-3353.
Description
Lockwasher
Bolt
Bolt
Torsion Spring
Valve Gear
Plunger Pin
Gear Shaft
Cotter Pin
Washer
Handle Socket Gear
Lockwasher
Hex Nut
Handle Bolt
Stud
Lower Handle
Upper Handle
Hex Head Screw
Handle Socket
Lockwasher
Lockwasher
Q'ty
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1