1. Manuals
  2. Brands
  3. Central Hydraulics Manuals
  4. Jacks
  5. 34271
  6. Operating instructions manual

Central Hydraulics 34271 Operating Instructions Manual

Manual operated floor jack
Hide thumbs

Advertisement

Table of Contents

Manual Operated
Note: There may be some slight differences in the appearance of the various
manually-operated floor jacks, however the instructions in this manual apply
to all of such jacks provided by Harbor Freight Tools.
Distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
2009 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Floor Jack
OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
. All rights reserved. No portion of this manual or any artwork
®
.
®

Advertisement

Table of Contents
loading

Related Manuals for Central Hydraulics 34271

Summary of Contents for Central Hydraulics 34271

  • Page 1 Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply to all of such jacks provided by Harbor Freight Tools. Distributed exclusively by Harbor Freight Tools ®...

  • Page 2: Important Safety Information

    NOTICE is used to SaVe THiS manual address practices Keep this manual for the safety warn- not related to personal injury. ings and precautions, assembly, operat- CauTiOn, without ing, inspection, maintenance and cleaning the safety alert procedures. Write the product’s serial symbol, is used to address number in the back of the manual near the practices not related to...
  • Page 3 Lift vehicle only at manufacturer-rec- information. If unreadable or miss- ommended locations. ing, contact Harbor Freight Tools for a replacement. Inspect before every use; do not use if parts loose or damaged. Before use, read manufacturer’s instruction manual for the vehicle (or Keep your work area clean and well object) you will lift.

  • Page 4: Operation

    The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that com- mon sense and caution are factors, which cannot be built into this prod- Pivot Assembly uct, but must be supplied by the operator.
  • Page 5 Pump the Handle until the top of the lifting Jack’s Saddle has nearly reached the WARNING! Park vehicle on a vehicle lifting point. flat, level, solid, surface safely Note: The Jack should be positioned at away from oncoming traffic. Turn 90°...

  • Page 6: Inspection, Maintenance, And Cleaning

    further use. lowering Do not use damaged equipment. Remove all tools, parts, etc. from Before each use, thoroughly test under the vehicle. the Jack for proper operation prior Position the Saddle under the lifting to its actual use. if the Jack ap- point.
  • Page 7 Floor Jacks Page 7 For technical questions, please call 1-800-444-3353.

  • Page 8: Limited 90-Day Warranty

    limiTeD 90 DaY WaRRanTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

  • Page 9: Specifications

    Hex Nut Link Bolt Handle Bolt Retaining Ring Stud Link Block (Ram) Lower Handle Cotter Pin Upper Handle Return Spring Hex Head Screw Retaining Ring Handle Socket Lockwasher Lockwasher Hex Nut Lockwasher SKU 34271 For technical questions, please call 1-800-444-3353.

  • Page 10: Assembly Diagram

    ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 34271 For technical questions, please call 1-800-444-3353.

Table of Contents