Cleaning And Maintenance - Tunturi FitCycle 40 User Manual

Hide thumbs Also See for FitCycle 40:

User manual (104 pages)

Table of Contents

Available languages

Enlarged version

English

Press START/ STOP key to start workout.

Press START/STOP key to pause workout.

Use RESET to go back to main menu.

User Program

Use UP/ DOWN key to select workout program, and

select MODE to confirm.

Use UP/ DOWN key to create user profile.

Set tension level for first of 20 colums, and confirm

with MODE to set second level, repeat this for all

colums.

Press and hold MODE button for 2 seconds to

confirm program setting.

Press START/ STOP key to start workout.

Press START/STOP key to pause workout.

Use RESET to go back to main menu.

H.R.C. mode.

Use UP/ DOWN key to select workout program,

choose H.R.C. mode and press mode key to enter

next setting entry for H.R.C. mode program.

Use UP/ DOWN key to set age.

Use UP/ DOWN key to select 55%, 75%, 90% or

TAG (Target H.R. _ Default 100)

Use UP/ DOWN key to set time, press MODE to

confirm.

Press START/ STOP key to start workout

Use RESET, to go back to main menu.

Watt Mode.

Use UP/ DOWN key to select workout program,

choose WATT and press MODE / ENTER key to

enter next setting entry for WATT mode program.

Use UP/ DOWN to set WATT target.

(default: 120Watt)

Use UP/ DOWN key to set TIME.

Press START/ STOP key to start workout.

Use UP/ DOW) to adjust target Watt level.

Press START/STOP key to pause workout.

Use RESET to go back to main menu.

Recovery

The RECOVERY key will only be valid if pulse is

detected.

TIME will show „0:60" (seconds) and counts down

to 0.

Computer will show F1 to F6 after the countdown

to test heart rate recovery status. User can find the

heart rate recovery level based on the chart below.

Press RECOVERY key again to return to the

beginning.

Outstanding

Excellent

Good

Fair

Below average

Poor

Body Fat

Press the BODY FAT key to start body fat

measurement.

During measuring, users have to hold both hands

on the hand grips. LCD display "-" "- -" "- - -" "- - -

-" for 8 seconds until computer finish measuring.

LCD will display BMI and FAT %.

Body fat mode error codes

*E-1

There is no heart rate signal input detected.

*E-4

Occurs when FAT% and BMI result is below 5 or

exceeds 50.

Trouble shooting:

If there is no signal when you pedal, please check if

the cable is well connected.

NOTE

•

When stop training for 4 minutes, the main

screen will be off.

•

If the computer displays abnormally, please re-

install the transformer and try again.