IVT GTE-1000 Manual page 8

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage~Frequency [V~Hz]
Rated power [W]
No-load speed [RPM]
Max. cutting line diameter [mm]
Cutting line diameter [mm]
Reserve of the cutting line [m]
Blade diameter [mm]
Vibration level [m/s
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Weight [Kg]
Safety class
PART LIST
1. Lock-off button
2. On/Off switch
3. Front handle
4. Auxiliary handle
5. Cable strain-relief hook
6. Carrying strap
7. Upper shaft
8. Lower shaft
9. Motor housing
10. Ventilation openings
11. Cutting head
12. Trimmer safety guard
13. Brushcutter blade
14. Gearhead
15. Inner flange
16. Locking nut
17. Cover plate
18. Outer flange
19. Cutting head cover
20. Cover release latch
21. Trimmer spool
22. Cutting line
23. Cutting line feed button
24. Line cutter
CONTENT OF THE BOX
Instruction manual (1 pc), protective guard (1 set), fix
screw (1 set), multi-purpose spanner (1 pc), brushcutter
blade (1 pc), trimmer spool (1 pc), auxiliary handle
assembly (1 set), carrying strap (1 pc), hex key (1 pc),
line cutter (1 pc).
Model
]
2
GTE-1000
230~50
1000
7500
420
1.6
5
255 (25.4)
6.749 (K=1.5)
75.6 (K=3)
95.5 (K=3)
5.8
II
INTENDED USE
This tool is intended for cutting lawns and small
areas of grass or similar soft vegetation in private and
hobby gardens and along bed edges, if equipped with
appropriate cutting attachment.
The device is not allowed to be used in public gardens,
parks, sports centres or at roadsides as well as in
agriculture and forestry.
Their light weight and manoeuvrability enable them to
be used in areas which are difficult to access and in
restricted spaces.
This unit can be used as either a trimmer or a
brushcutter, because it is equipped also with a metal
blade which makes it capable of cutting through thicker
weeds and overgrown areas.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature
supplied with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
8
GTE-1200
230~50
1200
7500
420
1.6
5
255 (25.4)
6.749 (K=1.5)
75.6 (K=3)
95.5 (K=3)
5.8
II