Specifications; Uhc-8300; Optional Accessories/Related Equipment - Sony UHC-8300 Operating Instructions Manual

Specifications

UHC-8300

General
Power requirements 240 V DC, 1.0 A (max.)
12 V DC, 9.5 A (max.)
–20 °C to +45 °C (–4 °F to +113 °F)
Operating temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Mass Approx. 7.0 kg (15 lb 7.0 oz) (Unit only)
Dimensions See page 52.
Image
Imaging element 1.25 inch CMOS image sensor
Method 3-chip
Resolution 8K: 7680 (horizontal) × 4320 (vertical)
QFHD: 3840 (horizontal) × 2160
(vertical)
Electrical characteristics
Sensitivity F8 (59.94P), F9 (50P) (at 2000 lx with
89.9% reflectance.)
Image S/N HD/59.94i: –62 dB
Horizontal resolution 3840 TVL (8K: screen centered)
5% or higher modulation
Geometric distortion Negligible (not including lens distortion)
Optical system specifications
Built-in filters Color temperature conversion filters
ND filters
Input/output connectors
CCU Optical/electrical multi connector (1)
LENS 12-pin (1)
VF 20-pin (1)
AUDIO IN CH1, CH2 XLR 3-pin, female (1 each)
AUDIO switch for MIC: –60 dBu
When AUDIO switch is set to LINE:
0 dBu, balanced
INTERCOM 1, XLR-type (1 each)
INTERCOM 2
EARPHONE Stereo mini jack (1)
DC IN XLR 4-pin (1), 10.5 V to 17 V DC
A: 3200K (clear)
B: 4300K
C: 6300K
D: CAP
1: Clear
2: 1/4ND
3: 1/16ND
4: 1/64ND
(can be selected up to –20 dBu by
menu or UHCU-8300 operations),
balanced
DC OUT
SDI 1, SDI 2
MONI
SYNC
PROMPTER
RET CTRL
REMOTE
TRACKER
MAG CTRL
CRANE
USB
NETWORK TRUNK
Supplied accessories
Before Using This Unit (1)
Operating Instructions (CD-ROM) (1)
Supplied label (1)
Cable clamp belt (1 set)
Camera number label (1)
Screws (+B3×8) (2)
Design and specifications are subject to change without
notice.
Optional Accessories/Related
Equipment
Optional Accessories
HD Electronic
Viewfinder
Microphone Holder
Return Video Selector
Tripod Attachment
Low-repulsion Shoulder
Pad
Related Equipment
UHCU-8300 8K Camera Control Unit
51
4-pin (1), DC 10.5 V to 17 V, max. 0.5 A
(This may be limited by the imposed load
or inputs.)
2-pin (1), DC 10.5 V to 17 V, max. 2.5 A
(This may be limited by the imposed load
or inputs. When supplying power from
the DC IN connector, power for a power
lens cannot be supplied when the supply
voltage is 10.5 V to 14 V DC. Also, the
current load temporarily increases by up
to 4.0 A when operating the power lens.)
BNC-type (1 each)
BNC-type (1)
BNC-type (1)
BNC-type (1), 1 Vp-p, 75 ohm
6-pin (1)
8-pin (1)
10-pin (1)
14-pin (1)
12-pin (1)
USB 2.0 Type A 4-pin (1) (for connecting
USB drive)
RJ-45 type 8-pin (1)
HDVF-EL20 (0.7-type, color)
HDVF-EL30 (0.7-type, color)
HDVF-EL75 (7.4-type, color)
HDVF-L750 (7-type, color)
HDVF-L770 (7-type, color)
CAC-12
CAC-6
VCT-14
A-8286-346-A