Table of Contents
Advertisement
FILE
Page name
Item
Page No.
<USER GAMMA>
READ (USB t CAM)
F04
PRESET
FILE ID
CAM CODE
DATE
<LENS FILE>
STORE FILE
F05
No.
NAME
F NO
CENTER MARKER
H POS
V POS
STORE
<OHB FILE>
STORE FILE
F06
<MATRIX FILE>
CUSTOM PRESET
F07
MATRIX
STORE FILE
CLEAR ALL
READ (USB t CAM) Execute using ENTER.
WRITE (CAM t
USB)
FILE ID
CAM CODE
DATE
<BOX CURSOR
1:
FILE>
2:
F08
3:
4:
5:
STORE
READ (USB t CAM)
WRITE (CAM t USB)
Settings
Execute using ENTER.
Execute using ENTER.
Max. 14 characters
Camera code
Date
Execute using ENTER.
1 to 17, 1
F1.0 to F3.4, F1.7
–20 to +20, 0
–20 to +20, 0
Execute using ENTER.
Execute using ENTER.
1
Execute using ENTER.
2
Execute using ENTER.
3
Execute using ENTER.
4
Execute using ENTER.
5
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Max. 14 characters
Camera code
Date
Description
Reads the user gamma file from a USB drive.
Sets the user gamma file items to the preset values in
internal memory.
Enters a comment for the user gamma file to be written
to a USB drive.
See "To specify a character string" (page 21).
Display only
Display only
The center marker is not included.
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
Changeable only when using a non-serial lens.
Changeable only when using a non-serial lens.
Sets and stores the center marker position:
H POS: Increasing the value moves the position to the
right.
V POS: Increasing the value moves the position
downwards.
Stores the offset values of items specific to the CMOS
image sensor (once stored, the values do not need to
be stored again if the sensor is reinstalled).
Stores matrix preset files:
Saved files can be loaded by setting PRESET of
<USER MATRIX> to CUSTOM 1 to 5.
Clears all the files.
Loads five preset files from a USB drive to internal
memory.
Writes five preset files in the camera's memory to a
USB drive.
Enters a comment for the preset files to be written to a
USB drive.
See "To specify a character string" (page 21).
Display only
Display only
BOX CURSOR FILE selection FILE name input.
Align the cursor to the left of the number to select the
BOX CURSOR FILE.
Align the cursor to the right of the number to enter the
BOX CURSOR FILE name.
See "To specify a character string" (page 21).
Stores a BOX CURSOR FILE name in the camera.
Transfers a BOX CURSOR FILE from a USB drive to
the camera.
Transfers a BOX CURSOR FILE from the camera to a
USB drive.
47
Advertisement
Table of Contents
