Bar Code Scanning; Attaching An External Bar Code Scanner; Using A Bar Code Scanner - Symbol VRC 6940 Product Reference Manual

Bar Code Scanning

Attaching an External Bar Code Scanner

1. Press the ON/OFF key to suspend the terminal.
2. Remove the plug cover from the scanner port on the back of the terminal, shown in
Figure 5-4.
3. Fit the scanner's connector plug into the connector. Align the red dot on the end of
the scanner cable with the red dot on the terminal's scanner connector.
4. Press the ON/OFF key to power the terminal on.
Scanner Port

Using a Bar Code Scanner

For information on using a bar code scanner, consult the documentation that came with the
scanner.
Figure 5-4. Scanner Port
Operating a VRC 6940
Back of Terminal
5-7