Table of Contents
Advertisement
For every day recording : To record a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday)
Press the STOP/L (down) button until "EVRY
DAY" appears. Then, press the F.FWD/B button.
For weekly recording : To record a
TV program at the same time on the
same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together. Then, press the
F.FWD/B button.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
10
Press the F.FWD/B or REW/s button. The program
is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to
return to original mode.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
11
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
Press the POWER button to set automatic timer
B 61 EVRY MON -:- -
-:- - - -
- - -/- -
- - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
recording. The RECORD indicator lights up.
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
•
You must turn off the TV/VCR to activate automat-
ic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
– TIMER PROGRAMMING –
start time.
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
B 61 7/05 FRI 7:12
-:- - - -
M
TIMER PROGRAM EXTENSION
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
To shift the time schedule of an automatic timer
recording.
– TIMER PROGRAMMING –
1)Press the POWER button.
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
2)Repeat step [1] on page 21.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
B 61 7/05 FRI
7:30
-:- - - -
M
3)Press the RECORD button and select the desired
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
program using the PLAY/K or STOP/L button.
- -
-/- - - - -
-:- -
-:- - - -
4)Press the RECORD button again.
Each additional push will shift forward the
– TIMER PROGRAMMING –
begin/end time for recording by 10 minutes. When
CH DATE
BEGIN END
the recording is already in progress, each additional
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
push will shift forward the end time only. If you
P
P
B 61 7/05 FRI
7:30
8:30
- -
M
M
- -
-/- - - - -
-:- -
-:- - - -
want to cancel while setting, press the
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
PAUSE/STILL button on the remote control. The
recording time returns to the original time.
NOTE: When you shift forward the time schedule
– TIMER PROGRAMMING –
during recording, the recording speed will automati-
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
cally be set to the SLP mode.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
P
P
B 61 7/05 FRI
7:30
8:50
- -
M
M
5)Press the F.FWD/B or REW/s button to exit the
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
setting menu. Then press the MENU button on the
- -
-/- - - - -
-:- -
-:- - - -
remote control to return to original mode.
TO CORRECT A PROGRAM
– TIMER PROGRAMMING –
CH DATE
BEGIN END
•
- -
-/- - - - -
-:- -
-:- - - -
While setting a program; press the REW/s but-
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
ton to go back one step and enter the correct num-
P
P
B 61 7/05 FRI
7:30
8:50
SP
M
M
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
bers using the PLAY/K or STOP/L button.
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 21.
3)Press the F.FWD/B button (or press the REW/s
4)Press the POWER button to set automatic timer
- 22 -
Finish setting the program
Set the timer
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
recording.
EN
9I03
Advertisement
Table of Contents
