Timer Program Extension - Sylvania 6313CB Owner's Manual

T5202 _VA 01.3.14 6:46 PM Page 22
For every day recording : To
record a TV program at the same
time on the same channel every
day. (Example: Monday through
Sunday)
Press the STOP/L (down) but-
ton until "EVRY DAY" appears. Then, press the
F.FWD/B button.
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the F.FWD/B but-
ton.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
– TIMER PROGRAMMING –
10
CH DATE BEGIN END
Finish setting the program
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Press the F.FWD/B or REW/s button. The program
- - -/- - - - - -:- - -:- - - -
B 61 EVRY DAY -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - is now completed.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
- - -/- - - - - -:- - -:- - - - To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
•
You must turn off the TV/VCR to activate automat-
– TIMER PROGRAMMING –
ic timer recording.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
If power is not turned off and you continue watch-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY MON -:- - -:- - - -
ing TV, "TIMER REC STANDBY" starts flashing
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
on the TV screen 2 minutes before the programmed
- - -/- - - - - -:- - -:- - - -
start time.
– TIMER PROGRAMMING –

TIMER PROGRAM EXTENSION

CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
To shift the time schedule of an automatic timer
P
B 61 7/06 FRI 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - recording.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Press the POWER button.
2)Repeat step [1] on page 21.
3)Press the RECORD button and select the desired
– TIMER PROGRAMMING –
CH DATE BEGIN END program using the PLAY/K or STOP/L button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - 4)Press the RECORD button again.
- - -/- - - - - -:- - -:- - - -
P
B 61 7/06 FRI 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - - Each additional push will shift forward the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
begin/end time for recording by 10 minutes. When
- - -/- - - - - -:- - -:- - - -
the recording is already in progress, each additional
push will shift forward the end time only. If you
– TIMER PROGRAMMING –
want to cancel while setting, press the
CH DATE BEGIN END
PAUSE/STILL button on the remote control. The
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
recording time returns to the original time.
P P
B 61 7/06 FRI 7:30 8:30 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
NOTE: When you shift forward the time schedule
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the F.FWD/B or REW/s button to exit the
– TIMER PROGRAMMING –
setting menu. Then press the MENU button on the
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
remote control to return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TO CORRECT A PROGRAM
- - -/- - - - - -:- - -:- - - -
•
While setting a program; press the REW/s but-
ton to go back one step and enter the correct num-
– TIMER PROGRAMMING –
bers using the PLAY/K or STOP/L button.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
•
After setting a program;
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:50 SP
M M
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat steps [1] - [2] on page 21.
- - -/- - - - - -:- - -:- - - -
3)Press the F.FWD/B button (or press the REW/s
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
4)Press the POWER button to set automatic timer
recording.
- 22 - EN
9I03