Timer Program Extension - Sylvania SRC22134 Owner's Manual

For every day recording : To
record a TV program at the same
time on the same channel every
day. (Example: Monday through
Sunday)
Press the STOP/T (down) but-
i _ r_n PnC_n_CJih_5 ]
/ .....
.. \.zJ. L l._- :
k' ..... J
ton until "EVRY DAY" appears. Then, press the
EFWDt_" button.
10
Finish setting the program
Press the F.FWDtI_ or REW/_I button. The program
is now completed.
• To set another program, repeat steps [2] to [10].
• Press the MENU button on the remote control to
return to original mode.
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
[
the STOP/,, (down) button / /
until "EVRY" and your desired | :: _: ::: ::: ::: ::|
day of the week appear together. _ _'_@_1_,'_:::: :: [
Then, press the F.FWD/I_ but- Iii _iiiii ii :: ii/
ton. " _ '
11
Set the timer .
Press the POWER button to set automatic timer
recording. The RECORD indicator lights up.
• You must turn off the TV/VCR to activate automat-
ic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
start time.
5 Set beginning hour
Press the PLAY/A or STOP/_' but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the EFWD/I_ button.
o_ c,_ aE_4 _Na
.t. ..... :.. ....
6
Set beginning minute / .......... /
Press the PLAY/A or STOPS' but-
/ _ .... /
ton until the desired minute appears./ :: iii ii,i]i::/
(Exam le" 30 for 7"30PM ...... l._....
p • ) I'........ --/
Then, press the EFWD/I_ button. L " _::::: ::: ': ::J
7 set
end hour
Press the PLAY/A or STOP/_' but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the EFWD/I_ button.
I
_ TIMER
_O0_AM_I_
-
]
O440_. _ a_ _O
.. 4.... :.. _LxJ*,.
-- _........ _..
l :: _:: : :: !!! !ii ill
8 Set end minute _"-_,_.
Press the
PLAY/A or STOP/_
but-/ : r7
ton until the desired minute appears./ :: _::::: .i._ ,,:_i:_::
(Example: "50" for 8:50PM) ]"r! _' _.
Then, press the EFWD/I_ button. [. .............
9
Set the tape speed
Press the PLAY/A or STOP/_ but-
ton until the desired tape speed
appears. (Example: SP)
t _TII_Rp_,op, AM_IhG - t
04 _11E 8_01_ _D
4 .:.. .:.._'+X
ii _iiiii iii iii!_
To shift the time schedule of an automatic timer
recording.
1)Press the POWER button.
2)Repeat step [1] on page 21.
3)Press the RECORD button and select the desired
program using the PLAY/A or STOP/V button.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the
PAUSE/STILL button on the remote control. The
recording time returns to the original time.
NOTE: When you shift forward the time schedule
during recording; the recording speed will automati-
cally be set to the SLP mode.
5)Press the EFWD,!I_ or REW/_I button to exit the
setting menu. Then press the MENU button on the
remote control to return to original mode.
TO CORRECT A PROGRAM
• While setting a program; press the REW/<I but-
ton to go back one step and enter the correct num-
bers using the PLAY/A or STOP,_ button.
• After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 21.
3)press the EF'WD_ button (or press the REW/_I
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/A or STOP/_ but-
ton.
4)Press the POWER button to set automatic timer
recording.
- 22 - EN
9103