Example Of Function Key Assignment - Honeywell VARIODYN D1 Comprio Operation Instruction Manual

Operation Instruction VARIODYN

Example of function key assignment

Pre-selection of circuit 1 (button with toggle function)
Selects circuit 1 (or multiple circuits, if programmed), which can be used as the target of an
Circuit 1
announcement.
Pre-selection of circuit 2 (button with toggle function)
Circuit 2
As described above, except circuit 2
Announcement / speak (keep button held pressed)
Starts an announcement to the preselected circuits. If a gong has been programmed as an
Announcement
attention signal for the announcement, it is only possible to speak after this signal has
finished.
Music on / off (button with toggle function)
Switches the background music on/off. The music can be played from an external CD player
Musik
on / off
or other audio source (via the available audio inputs of the DCS, UIM or via digital audio data
of the SCU).
Intercom DCS 2: (keep button held pressed)
Intercom
Establishes an intercom connection to another terminal. Communication takes place using the
DCS 2
microphone and built-in speaker.
Fire announcement (button with toggle function)
Fire
Pressing the button starts a previously saved fire announcement for the assigned loudspeaker
announcement
circuits (areas).
Toggle function  Press once = ON  Press again = OFF
Detailed information on this topic can be found in the Commissioning Instruction
(Part No. 798667.HO.GB0).
The button labelling can be created on a project-specific basis. The labels are laid in the button
recesses and held in place with the covers.
8
® D1 Comprio
FB 798666.HO.GB0 / 07.13