Connecting The S-Video Input; Connecting The Component Video Input - BenQ SE2231 User Manual And Quick Start Manual

Connecting the S-Video input

1. Connect the S-Video output jack on your output equipment to the S-Video jack on
your TV using an S-Video cable (not provided). Pay attention to the pins in the plugs
when inserting so to keep the pins from bending.
2. Connect the S-Video audio output jack of the output equipment to the AV/SV AUDIO
L/R input jacks using a suitable audio cable (or a composite video cable. In this case,.
The yellow plug will not be used).
Press the INPUT button on TV or 信号选择
as your input source to watch S-Video.
 There is no need to connect to both the composite video and S-Video jacks on one same video
device, just connect one of them. For better image quality, S-Video jacks is recommended.

Connecting the Component Video input

1. Connect the component video output jacks on your output equipment to the Y, Pb and
Pr jacks on your TV using a component video cable (not provided). Ensure that the
colors of the plugs and jacks match.
2. Connect the audio output jack on the output equipment to the YPbPr AUDIO L/R
input jacks using a suitable audio cable (or a composite video cable. In this case. The
yellow plug will not be used).
Press the INPUT button on TV or 信号选择
as your input source to watch component video.
 A Component video source provides the best image quality among other analog sources. Please
make sure you connect the jacks by colors correctly. Any mistake in connecting them will
deteriorate the image quality.
on the remote control to select "S-Video"
S-Video cable
on the remote control to select "YPbPr"
Component Video cable
Audio cable
DVD Player
Audio cable
DVD Player
Connecting video and audio signals 25