Advertisement
•
LED BEHAVIOR
LED
COLOR
ON - Internal power-on completed successfully.
POWER
GREEN
FLASHES - Initializing.
OFF - No power supplied.
DS
FLASHES - Once every second when DS scan is in progress and when a firmware upgrade is in progress.
GREEN
(downstream)
ON - Locked to DS channels and registered with the CMTS.
FLASHES - Once every second when US scan is in progress and when a firmware upgrade is in progress.
US
(upstream)
GREEN
ON - Locked to US channels and registered with the CMTS.
FLASHES - Obtaining IP address and configuration file.
ONLINE
GREEN
ON - Configuration completed successfully, network connected.
OFF - Network connect failed.
ON - Telephony is enabled and telephone is on-hook.
TEL1
GREEN
OFF - Telephony is not provisioned.
FLASHES - Call is in progress or eMTA is attempting to register.
ON - Telephony is enabled and telephone is on-hook.
TEL2
GREEN
OFF - Telephony is not provisioned.
FLASHES - Call is in progress or eMTA is attempting to register.
FLASHES - 2.4GHz WiFi traffic is being passed.
2.4G
GREEN
ON - 2.4GHz WiFi is enabled.
OFF - 2.4GHz WiFi is disabled.
FLASHES - 5GHz WiFi traffic is being passed.
GREEN
ON - 5GHz WiFi is enabled.
5G
OFF - 5GHz WiFi is disabled.
ON
ETHERNET
GREEN
/
ON
ORANGE
1-4
(rear panel)
FLASHES
device.
GREEN
- An Ethernet device is connected to the UBC1310BA10 at 1000 Mbps speed.
ORANGE
- An Ethernet device is connected to the UBC1310BA10 at 10/100 Mbps speeds.
(GREEN
or ORANGE) - Data is being passed between the UBC1310BA10 and the connected Ethernet
www.ubeeinteractive.com
UBC1310BA10 Quick Installation Guide
DESCRIPTION
✴ Please note that both the 2.4GHz and
5GHz radios are enabled by default.
4
Advertisement
