BERNINA Stitch Regulator (BSR)
11.7 Securing
Securing in BSR1 mode with the button «Start/Stop»
Prerequisite:
•
•
> Lower the feed dog.
> Lower the presser foot.
> Push the button «Needle up/down» twice.
> Hold the upper and the bobbin thread.
> Push the button «Start/Stop».
> Sew 5 – 6 securing stitches.
> Push the button «Start/Stop».
> Cut the thread.
Securing in BSR2 mode
Prerequisite:
•
•
> Lower the presser foot.
> Touch the icon «i»-Dialog.
> Touch the icon «Securing».
> Press the foot control or the button «Start/Stop».
By moving the fabric some short securing stitches are sewn, then the programmed stitch length is activated
and the securing function is deactivated automatically.
126
The BSR presser foot is attached and connected with the machine.
The BSR display is opened and the BSR1 mode is activated.
– The bobbin thread is brought up.
– Start the BSR mode.
– The BSR mode stops.
The BSR presser foot is attached and connected with the machine.
The BSR display is open and the BSR2 mode is activated.