Edgestitching Using The Seam Guide (Optional Accessory); Sewing Hem Edges - Bernina 570 QE User Manual

Practical stitches

6.16 Edgestitching using the seam guide (optional accessory)

When sewing parallel wider lines, it is recommended to guide the seam guide (optional accessory) along a
sewn line.
> Attach the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole of the presser foot.
> Adjust the width as desired.
> Tighten the screw.
> Guide the folded edge along the seam guide.

6.17 Sewing hem edges

When using the Blindstitch foot No. 5, it is recommended to to select a needle position far left or far right.
When using the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D all needle positions are
possible.
> Attach the Blindstitch foot No. 5 or the Reverse pattern foot No. 1C or the Edge stitch foot No.
10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Place the inside upper edge right against the guide of the Blindstitch foot.
> Select the needle position far right to sew along the upper edge.
97