How To Install The Wall Mount; How To Assemble The Wall Mount Support And Display - LG LSW840B Install Manual

3

How to install the wall mount

- Mount the product only on a concrete wall. LG Electronics Inc. is not liable for any accidents caused by mounting
the product on walls made of any other materials, including wood, plywood, and bricks.
Wall mount
screw
4

How to assemble the wall mount support and display

- Always install the display with 2 or more people.
→ After attaching the guide spacers to the set, hang it on the wall mounting bracket in the direction of the arrows. Attach the lower
part first, then attach the upper part by slightly lifting up the set.
- Make sure that the product is attached securely by pulling on the bottom of the set.
- When mounting the product that has a speaker, hold and lift up the product, not the speaker.
→ If the screw cannot be assembled in the designated
location inevitably, it can be assembled by
rearranging to the closest location. But, do not
change 2 or more locations from the designated spot.
→ Attach the right and left side with two bolts each.
→ At this time, use a + driver (manual or motorized) or
8 mm wrench to tighten the screw so that the wall, wall
bracket and screw are completely pressed against one
another.
* Caution: Prevent the power cord from being pinched between the
wall mounting bracket and the set when installing the set.
(A pinched power cord may cause damage to the product.)
When inserting the guide spacer,
align its center with the arrow
shown in the figure for easy
installation.
5