Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Related Manuals for LG LSW100B
Summary of Contents for LG LSW100B
- Page 1 OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW100B LSW100BG P/NO : MFL63640503 (1101-REV03) www.lg.com...
-
Page 2: Important Safety Instructions
Wall mount screw 4 units 8 units * Due to the shallow clearance between the display and the wall, the LSW100B Wall Mounts may require the use of the included angled adapters. <Component cable with angled connectors> * Note that the included angle adapters may block other connections on the back of the TV. -
Page 3: Before Installation
Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. -
Page 4: Installation Method
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Stud finder / Drill. You may also need an 8mm socket wrench or an 8mm drill bit for concrete. Separating the TV bracket Safety pin <Work procedure> 1. - Page 5 How to attach to masonry walls - Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Please follow the below direction. - Check the material of the wall and the thickness of the finishing. - When installing the product on the wooden wall, refer to page 6.
- Page 6 <When mounting to wooden studs> drywall a. Locate and mark the centers of the wall studs using a stud finder. b. After aligning the wall bracket on the wall where the center of the wood stud is marked, mark the location of the screws and then remove the wall bracket.
-
Page 7: Product Specification
Product specification -15°~+15° ±2° <With the bracket removed.> <With the bracket attached.> <With the bracket removed.> Model Name LSW100B/LSW100BG Width (mm) Height (mm) Depth (mm) Weight (kg) Wall Mount VESA Specification 100 X 100/200 X 100 Max. UL Load Capacity (kg) <With the bracket attached.>... - Page 8 The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays: 19/22/26/32LD* 19/22/26/32LE* 19/22/26/32LX* 19/22/26/32LK* 19/22/26/32LZ* 19/22/26/32LW* 19/22/26/32LV*...