Removal Of Electrical Box - Daikin RKS42G2V1B Service Manual

Removal of Electrical Box

2. Removal of Electrical Box
Procedure
Step
1. Disconnect the
connecting wires.
1 Remove the 3 screws
to remove the wiring
fixture.
Then remove the all
screws to disconnect
the power supply
cables and the
connecting wires.
2. Remove the electrical
box.
Release the outdoor
1
temperature thermistor.
2 Lift up the guard net
and remove it.
4
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Connecting
wire
Outdoor temperature thermistor
When reassembling, fasten
the wires with screws on the
terminal board.
Terminal
board
Power
supply
cable
Wiring fixture
(R12192)
(R12193)
Guard net
(R8143)
Si001070
Points
Removal Procedure