Electrical Wiring Connection - Daikin F Series Instruction Manual

FWC02/03/04/05/06/08/10FD
FCU 1
FL FM FH N
FSC
TH
220-240V/~/50Hz or
X1
208-230V/~/60Hz
IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
national codes and/or national codes and regulations. They are also subject to the type of installation and
size of conductors.
** The appropriate voltage range should be checked with label data on the unit.
A main switch or other means for disconnection, having a contact separation in all poles, must be incorporated
in the fixed wiring in accordance with the relevant local and national legislation.
Model
Voltage Range**
Power Supply Cable Size*
Number of Conductors
Recommended Time Delay Fuse*
Model
Voltage Range**
Power Supply Cable Size*
Number of Conductors
Recommended Time Delay Fuse*
Note:
This is a proposed wiring connection. It may change subject to the chiller unit and must comply with the local and national
code and regulations.

ELECTRICAL WIRING CONNECTION

FCU 2
FL FM FH
FSC
TH
L
N
X2
Chiller
Indoor FWC02FD
Indoor
2
mm 1.5
5
A 1
Indoor FWC06FD
Indoor
2
mm
A
N FL
L
N
220-240V/~/50Hz or
X3
208-230V/~/60Hz
FL Fan Low
FM Fan Medium
FH Fan High
N Neutral
FSC Fan Speed Controller
X1, X2, X3 Relay (220~240V, 10A)
TH Thermostat
FWC03FD
220V-240V/ ~ /50Hz + !
1.5
5
1
FWC08FD
220V-240V/ ~ /50Hz + !
1.5 1.5
5 5
2 2
1-5
FCU 3
FM FH N
FSC
TH
L
N
220-240V/~/50Hz or
208-230V/~/60Hz
!
There must be an all pole
disconnection in the supply mains
with a contact separation of at
least 3mm.
All power line must be from the
same phase.
FWC04FD FWC05FD
1.5 1.5
5 5
1 1
FWC10FD
1.5
5
3