Page 1
LOG PLACEMENT Log Set Assembly: LOGS-6000GLX INSTRUCTIONS LOGS-6000GLXLP Model: 6000GLX-IPI If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions. STEP 1. CAUTION: Logs are fragile! Carefully remove the logs, grate and supporting cardboard from the inside of the fi...
Page 2
Figure 5 Front View Figure 6 Top View STEP 4. Log #2 NG (SRV2101-086): Log #2 LP (SRV2101-088): Log #2 is the right burning log. The air shutter in the end of the burner tube goes over the right brass orifi ce located behind the main burner. The right end of the log goes tight against the right refractory wall.
Page 3
Figure 12 Top View Figure 11 Front View STEP 7. Log #5 (SRV2101-195): Place log #5 on top of log #1 and log #4. The bottom of this log has two slots in it that both go over the two tabs molded in the top of log #1. Figure 14 Top View Figure 13 Front View STEP 8.