Advertisement
Figure 11 Front View
STEP 7. Log #5 (SRV2101-195):
it that both go over the two tabs molded in the top of log #1.
Figure 13 Front View
STEP 8. Log #6 (SRV2101-196):
log. Place the slot over the tab on top of the right end of log #2. The end of this log has a square notch in it that rests into
the second tine from the right on the grate. Note: May be necessary to tilt grate forward to interlock bottom notch in log.
7 7
Figure 14 Front View
STEP 9. Log #7 (SRV530-703):
against the second tine from the left on the grate.
5 5
Place log #5 on top of log #1 and log #4. The bottom of this log has two slots in
6 6
Place log #6 on top of log #2 and the grate. There is a slot in the bottom of this
Place log #7 on top of log #1 and the grate. The lower right end of the log rests
Heat & Glo • 6000GLX-IPI • 2101-910 Rev. C • 8/06
5 5
Figure 12 Top View
Figure 14 Top View
7 7
Figure 15
Top View
6 6
3
Advertisement
