Additional Approvals For Sinaut Products For The Analog Telephone Network - Siemens SIMATIC NET TeleControl SINAUT ST7 System Manual

Certifications and approvals

7.2 Additional approvals for SINAUT products for the analog telephone network

FM approval
The SINAUT ST7 products included in the "List of SINAUT ST7 products" are certified as
follows:
FM Approval according to Factory Mutual Approval Standard Class Number 3611, Class I,
Division 2, Group A, B, C, D
Injury to persons and damage to property is possible.
Injury to persons and damage to property can occur in hazardous areas in the connecting
cables are removed while a SINAUT ST7 device is in operation.
Always turn off the power to SINAUT ST7 devices before removing connecting cables in
hazardous areas.
UL/CSA approval
The SINAUT ST7 products included in the "List of SINAUT ST7 products" are certified as
follows:
UL Recognition Mark
Underwriters Laboratories (UL) based on:
Standard UL 508
CSA Certification Mark
Canadian Standards Association (CSA) based on:
Standards CSA No. 14 and 142
File no. E208174
7.2 Additional approvals for SINAUT products for the analog telephone
network
SINAUT ST7 products for the analog telephone network including the MD3 modem
Name
TIM 33
TIM 43
TIM 43D
MD3
For the stand-alone MD3 modem and for all TIM modules with integrated MD3 modems
listed in the table, the following certifications apply for Europe, USA and Canada.
262
WARNING
Order no.
6NH7 800-3AA30
6NH7 800-4AA30
6NH7 800-4AD30
6NH7 810-0AA30
Hardware version
6 or higher
6 or higher
6 or higher
4 or higher
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10