Table of Contents
Advertisement
Network structures and topologies
2.2 Configurations
2.2
Configurations
The symbols used in the following configurations represent the various modules with their
LAN or WAN interfaces.
Note
Notes on TIM 4 / TIM 4R-IE
• The two WAN interfaces of a TIM 4R / TIM 4RD can both have the same function (for
example 2 x master) or different functions (for example node + master).
• With redundant WAN connections, a TIM 4 or TIM 4R-IE with two interfaces must always
be used because redundant paths always start and end on a TIM module.
2.2.1
Configurations with IP-based WAN
IP-based network, linking via switches
Figure 2-1
76
IP-based network, linking via switches
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Advertisement
Table of Contents
