Table of Contents
Advertisement
S
S
UPER
ERVER 6014H-8/6014H-82/6014H-X8 Manual
Figure 6-2. System Cooling Fans (with optional front bezel shown)
10-cm Blower Fans
6-4
Drive Bay Installation/Removal
Removing the Front Bezel
If your system has a front bezel (optional, p/n CSE-PTFB-813) attached to
the chassis, you must first remove it to gain access to the drive bays. To
remove the bezel, first unlock the front of the chassis then press the re-
lease knob (see Figure 6-3). Carefully remove the bezel with both hands. A
filter located within the bezel can be removed for replacement/cleaning. It is
recommended that you keep a maintenance log of filter cleaning/replace-
ment, since its condition will affect the airflow throughout the whole sys-
tem.
6-4
Advertisement
Table of Contents
