SCSI Controller Enable/
Disable
Jumper JPA1 allows you to enable
or disable the SCSI headers.
default setting is pins 1-2 to enable
all four headers. See the table on
the right for jumper settings.
Power Force On
Jumper JPF allows you to force the
system into a permanent power on
state.
Power will remain on (re-
gardless of the power button being
activated) until this jumper is reset
to "open".
The default setting is
open. See the table on the right for
jumper settings.
5-10 Onboard Indicators
GLAN LEDs
Each Ethernet port has two LEDs.
The yellow LED indicates activity
while the other LED may be green,
orange or off to indicate the speed
of the connection.
on the right for the functions as-
sociated with this second LED.
Chapter 5: Advanced Serverboard Setup
The
See the table
5-23
SCSI Enable/Disable
Jumper Settings
(JPA1)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
Power Force On
Jumper Settings
(JPF)
Jumper
Position
Definition
Open
Normal
Closed
Power Force On
Gb LAN Right LED
Indicator
LED
Color
Definition
Off
No Connection
Green
100 MHz
Orange
1 GHz