Advertisement
ALCOVE CLEARANCES
Minimum Width
36" (914mm)
Minimum Height
48" (1219mm)
Maximum Depth
30" (762mm)
MOBILE HOME INSTALLATION
● Secure the heater to the fl oor using the holes in the pedestal of the
appliance.
● Ensure the unit is electrically grounded to the chassis of your home
(permanently).
WARNING: Do not install in a room people sleep in.
CAUTION: The structural integrity of the manufactured home fl oor,
wall and ceiling/roof must be maintained
• Outside fresh air is mandatory. Secure outside air connections directly to
fresh air intake pipe and secure with three (3) screws evenly spaced.
March 2008 Product Specifi cations Book
Gas Inbuilt
EXHAUST AND FRESH AIR INTAKE LOCATION
Outside fresh air is mandatory when installing this unit in airtight
homes and mobile homes.
A Fresh-air intake is strongly recommended for all installations.
Failure to install intake air may result in improper combustion as well as
the unit smoking during power failures.
When connecting to an outside fresh air source, do not use plastic or
combustible pipe. A 2" minimum (51 mm) ID (inside diameter) steel,
aluminum or copper pipe should be used. It is recommended, when you
are installing a fresh air system, to keep the number of bends in the pipe
to a minimum.
EXHAUST:
Base of unit to center of fl ue
Side of unit to center of fl ue
Center of unit to center of fl ue
FRESH AIR INTAKE:
Base of unit to center of intake
Side of unit to center of intake
Center of unit to center of intake
INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENTING
MANUFACTURER.
14
5
/
"
8
(356mm)
7
11
/
"
16
(291mm)
(25mm)
OUTSIDE FRESH AIR CONNECTION
Outside
Wall
2" ID
(51 mm)
GF55 Wood Pellet Stove
20-5/16" (508mm)
6-11/16" (170mm)
5-3/4" (146mm)
14-5/8" (356mm)
11-7/16" (291mm)
1" (25mm)
3
5
/
"
4
(146mm)
20
5
/
"
16
(508mm)
6
11
/
"
16
1"
(170mm)
Optional
Elbow
3
Advertisement
