Page 1
Gas Inbuilt GF55 Wood Pellet Stove GF55 Greenfi re Pellet Stove " (586mm) " (40mm) " (494mm) " (866mm) " (332mm) CLEARANCES TO COMBUSTIBLES These dimensions are minimum clearances to combustibles, however it " is highly recommended that you leave suffi cient room on each side (20" (620mm) where possible) for servicing, routine cleaning and maintenance.
Page 2
Gas Inbuilt GF55 Wood Pellet Stove EXHAUST AND FRESH AIR INTAKE LOCATION ALCOVE CLEARANCES EXHAUST: Base of unit to center of fl ue 20-5/16" (508mm) Minimum Width 36" (914mm) Side of unit to center of fl ue 6-11/16" (170mm) Center of unit to center of fl ue 5-3/4"...
Gas Inbuilt GF55 Wood Pellet Stove VENT TERMINATION REQUIREMENTS Letter Minimum Clearance Description 24 in (61 cm) Above grass, top of plants, wood, or any other combustible materials. 48 in (122 cm) From beside/below any door or window that may be opened. 24 in (61 cm) From above any door or window that may be opened.
Gas Inbuilt GF55 Wood Pellet Stove CORNER THROUGH WALL INSTALLATION VERTICAL RISE WITH HORIZONTAL TERMINATION INSTALLATION Fresh Air Intake A 45° elbow with a rodent screen may be used in place of the termination cap (or stainless steel termination hood). 3"...
Gas Inbuilt GF55 Wood Pellet Stove INSIDE VERTICAL INSTALLATIONS HEARTH MOUNT INSTALLATION Rain cap - ensure cap is at least 2 feet (610mm) above the roof at the lowest point Storm collar Damper Removed or Fastened Open Roof flashing Mantel Minimum 8"...