Problem
Cracking/
Discoloring
Components are
broken or lost.
Pump does not
response.
Pump motor
display flashes
3 seconds, then
shuts down
automatically.
The silicone tube
is too loose when
it is plugged into
machine or cap.
English
24
Solution
Avoid contact antibacterial or abrasive detergents/
•
cleaners. Combinations of detergents, cleaning
products, sterilisation solution, softened water, and
temperature fluctuations may cause the plastic to
crack. If any crack is found, stop using the pump
immediately. Contact Philips Avent Consumer Care
center for spare components.
Food coloring can discolor components, but this
•
will not affect your usage.
Keep all the components away from the source
•
of heat or direct sunlight as it can discolor
components.
Contact Philips Avent Consumer Care center for
•
spare components. See back cover for contact
details.
Make sure the pump is correctly assembled and
•
press the power button to switch on.
Make sure the cables between the pump and the
•
power socket are correctly connected.
When using the power adapter to supply power,
•
make sure you are using the one Philips provided.
Then make sure it is connected properly, then
switch the pump on again.
If you use batteries to supply power, press the
•
power button to switch off. Replace with new
batteries and switch the pump on again.
After checking the 2 scenarios above, if the
•
problem persists, contact the Consumer Care
center for help.
Change the new back up silicone tube connector.
•