Philips AVENT SCF301 User Manual page 13

Note
Do not worry if your milk does
•
not flow immediately. Relax and
continue pumping. The first few
times you use the breast pump,
you may need to use a higher
expression mode to get your
milk flowing.
Stimulation and expression
•
levels match to the number of
the flowers lighting up. That is,
1 flower lighting up means level 1,
and 2 flowers lighting up means
level 2.
When needed, you can also
•
use stimulation mode to do
expression.
6 During expression, you can
switch between the stimulation
mode and expression mode
by pressing the mode
selection button (
expression.
) for better
Note
You do not need to use all
•
stimulation/expression levels,
only use the levels that are
comfortable for you.
Place the pump motor on a
•
stable and flat surface, or hang
up steadily with the included
sling, to avoid any accidental
drops when in use. If not, this
may pull the pump body off
from the breast and cause injury.
If you regularly express more
•
than 125ml per session on
each breast, you can use a
260ml/9fl oz Philips Avent
bottle to prevent overfilling and
spillage.
If there is no operation on
•
this appliance (such as pause,
change stimulation level
and expression level) for
30 minutes (including in pause),
the appliance will shut down
automatically.
7 When you have finished
expressing, press the power
button ( ) to switch off the
breast pump and carefully
remove the pump body from
your breast.
English
13