Removal Of Heat Exchanger - Rinnai REU-V2632FFUG Service Manual

f. Remove fan motor
Infinity REU-V2632FFUG / HD200i REU-VM2632FFUC

16) Removal of Heat Exchanger

a. Remove PCB
b. Remove fan motor
c. Remove 2 pin connector of thermal fuse
d. Remove flame rod terminal of high tension cord
e. Remove anti frost heater switch
f. Remove 2 pin connector
g. Remove 3 pin connector
h. Remove back pressure tube
i. Remove air intake.
j. Remove fixing screw
k. Remove fixing screws of the heat exchanger unit
l. Remove heat exchanger screws
- 35 - Issue 1 - 16/12/09 ©Rinnai