Changing The Engine Oil - Toro Z Master Professional 5000 Series Operator's Manual

Figure 46

Changing the Engine Oil

Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
3. Disengage the blade-control switch (PTO) and
engage the parking brake.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Drain the oil from the engine
g194611
41
(Figure 47).
Figure 47
g008804
g027734