Specifications; Attachments/Accessories - Toro Z Master Professional 5000 Series Operator's Manual

Refer to the Software Guide for more information.
1. Safety-interlock indicators
2. LED status light
LED Status Light
The LED is multi-colored to indicate the system status
and is located on the right side of the panel.
•
Solid Green—indicates normal operating activity.
•
Blinking Red—indicates a fault is active.
•
Blinking Green and Orange—indicates a clutch
reset is required.
•
Solid Red—indicates maintenance is required.
Refer to the Software Guide for more information.
Fuel Gauge
When the fuel-tank level is low, the LED status light
flashes a red light and the fuel-level symbol on the
screen flashes.
Refer to the Software Guide for more information.
Safety-Interlock Indicators
There are symbols on the hour meter that indicate with
a black bar that the interlock component is positioned
correctly (Figure 6).
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N
EUTRAL
Figure 6
3. Information screen
(Figure
- position when exiting
LOCK
the machine (Figure
motion-control levers into the N
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to
Valve (page 31).
g231075

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Without deck
Deflector up
Deflector down
Length
Roll bar up
Roll bar down
Height
Roll bar up
Roll bar down
Weight
569 kg (1,255 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
4).
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
13
22). Always position the
-
EUTRAL LOCK
Using the Fuel-Shutoff
135 cm (53 inches)
157 cm (62 inches)
192 cm (76 inches)
211 cm (83 inches)
215 cm (85 inches)
179 cm (71 inches)
119 cm (47 inches)
position